Titan WiFi - Apple TV

How to connect your Apple TV to Titan WiFi using an Apple Computer and Apple Configurator.

• An apple computer running OS X 10.13.4 or higher.
• The latest Apple Configurator installed on that computer
• A cable to connect the Apple TV to the comptuer
• An ethernet cable
• An HDMI cable to connect to the TV.

1. On your Mac, make sure you are logged into Titan WiFi.
2. Go to Spotlight on the top-right and search for Keychain Access. 
3. In Keychain Access make sure your login keychain is highlighted and the certificates category is highlighted.
4. Locate three certificates: nps.uwosh.edu, GeoTrust Global CA, & RapidSSL SHA256 CA -G3
5. Right click each of them separately and export to a location (on the desktop is fine).
6. Make sure your apple TV is connected via ethernet cable and up-to-date. 
7. Plug in your Apple TV to your Mac and start Apple Configurator. 
   1. Don't Enroll
   2. Don't Install
   3. Create New Profile. 
   4. Go to the Certificates tab and add both of the certificates you saved earlier.
8. Go to the WiFi tab and add Titan WiFi. 
   1. SSID = Titan WiFi
   2. Security Type = WPA/WPA 2 Enterprise
   3. Protocols = PEAP
   4. Username is your netID
   5. Password is your netID password.
   6. Outer Identity is your NetID. 
9. Click the Trust Tab. 
10. Check all three Certificates as trusted.
11. Select the Profile and click Next. 
12. Select Configure.
13. Follow the instructions.